The FUTURE 2005 and Future I-160 is based on an electromagnetic pulse method which can be used to select anomalies in the target area. Thus the device is able to detect different structures and natural features of the ground like for example:

		metal canisters, tanks, boxes
		voids, backfillings, grave chambers, caves and tombs
		steel pipes and water conduits
		water deposits

The Future I-160 is a professional measuring instrument with a very high resolution antenna of 50 cm width. Compared to the future with its 100 cm antenna the Future I-160 has a four times higher density of measured data. Compared to the imager with its 16x lower resolution the device is most suitable for the professional archeological and industrial use. This fact is reflected also in the grafical representation inside the software Detailed graphics are the basis for an exact determination of the size and depth of objects. Because of the compact form of the antenna the device is not only usable for the measurement in even ground conditions. Besides the usual graphical representation the device provides two more particularities. On the one hand it makes buried object immediately visible with the horizontal live picture and on the other hand a typified ultrasound scan can be created with the vertical antenna

The Rover Deluxe is an upgrading of the device rover c and specially interesting for treasure hunters, who are searching for gold or silver. The integrated metal differentiation (discrimination) makes it possible to filter out certain types of metals. The device includes the following functionality:

		metal detector with discrimination
		automatic and manual ground scan
		graphical evaluation of measured values

The usage of the integrated discriminator, which can be activated also during a graphical measurement, allows a operation even in high mineralized areas. The device is most suitable for the usage in areas with difficult access because of the small size of the probe. After every measurement the recorded ground values can be analysed in detail with the software In this way it is possible to determine the size and depth of located objects. Also it is possible to draw conclusion to a special type of metal, dependent on the adjustment of the discriminator.

Like the rover c also the Rover Deluxe can be upgraded with the optional available super sensor This special antenna allows a ground scans of very high resolution and also a discrimination between ferrous and non-ferrous metals.

Because of the integrated microprocessor technology ground balance, measuring of depth and data storage will be performed automatically by the device. The evaluation take place at the computer where the scanned area can be analyzed in a three-dimensional graphic inside the software

The Rover C and Rover C II, advancement of rover c and graifinder is based on an electromagnetic pulse method which can be used to select anomalies in the target area. It also includes a geo-electrical measuring method to detect all kind of cavities. Here some examples of objects and structures which can be detected:

		boxes and chests
		gold and silver objects
		grave chambers, sarcophaguses and tombs
		bunker, galleries, caves and tunnels

As a combination of two devices the Rover C II offers a graphical ground scan and a geo-electrical measurement. Besides the standard software there is additionally the super sensor connectable. In combination with the professional software visualizer there are graphical measurements in high resolution possible, which offer valuable clues to the depth and size of located objects Because of the integrated microprocessor technology ground balance, depth measurement and data storage will be performed automatically by the device. The evaluation of the measured data takes place at the computer where the scanned area can be analysed in a three-dimensional graphic with the help of the 3d software

The GEMS is a HR-Gradiometer, which is principally made to find ferromagnetic metals like iron, nickel and kobalt. With the optional available super sensor there is also a discrimination between precious and non-precious metals possible. Even cavities like graves, tunnels and grave chambers can be located with the Gems.

The device includes the following functionality:

		accoustical magnetometer
		graphical field research
		evaluation of measured results on a computer

All recorded measured value can be stored in the internal memory of the device temporarily and later transfered to a computer for analysis in the software visualizer In the internal memory of the device maximal 65500 measured values can be stored. Additionally direct data transmission via bluetooth-technology to a computer is possible. Because of the easy handling and facile usage the GEMS is specially interesting for beginners. Already after a short working time with the device you will come to appreciate the compact scale of the equipment. The small and transportable form allows the usage of the device in in different types of terrain. So it is also easy to handle in areas with difficult access. With the retaining clip on the back side of the device the GEMS is also portable on a girdle.

exp4000         exp5000

The eXp 4000 and eXp 5000 are the successor of the eXp 3000. Advanced technology allows measurements in brillant resolutions. The Handling is absolutely easy and possible without the need of a laptop. The measurement unit of the eXp 4000 includes a pc-module which what the data will be displayed immediately on the color screen. All measured data will be stored in the internal 128 MB memory and can be transfered to a normal computer to evaluate and determine depth, size and position of targets with our professional software visualizer

		Distinction of metals ( gold, silver, iron )
		Detection of cavities ( bunkers, tunnels, burial chambers, graves )
		Intuitive menu navigation with voice output
		Easy handling and compact equipment
		No laptop is needed for working

  The comprehensive equipment of the eXp 4000 is only one point that makes it a unique treasure hunting unit. Every single probe was optimized for its own purpose. So you can work with the following antennas:

		GPR-Antenna ( 25cm, 50cm, 75cm, 100cm )
		Antenna for metal discrimination ( ddv system )
		Antenna for tunnel detection
		super sensor for high resolution ground scans

With a weight of only 1500g the eXp 4000 is ideal for fast searching an area. The integrated color monitor is also usable for night searching. But also in the sunlight the display is very clear in contrast to a laptop.

  To ease the work with eXp 4000 and the subsequently image evaluation the following functionality was integrated:

		Automatic display of object differentiation
		Automatic signal stabilization during measurement
		Automatic antenna identification
		Pre-filtration of potential mineral structures

FS-Thermoscan is a measuring device to detect differences in temperatures of the environment. So it can identify cold and warm areas of a field and conclusions concerning hidden objects and structures are possible. FS-Thermoscan is usable as a stand-alone device or can be connected to the Earth Imager exp 4000 and exp 5000 In that way it is even possible to get 3d graphics out of the measure values.

Possible applications are

		the detection of cavities (caves, tunnels, chambers, chests, ...),
		the visualization of the distribution of temperatures as well as
		the measurement if differences in temperatures.

The FS-Thermoscan stands up for its usage and compact design. Create high resolution 3d graphics of the underground by measuring the differences in temperature on the surface of the ground

Because of the integrated laser pointer pinpointed measurements are possible. The device works contactless and therefore a field can also be researched from far distances. This is an important advantage if the field is impassable by the searcher.

The Bionic 01 and Bionic alpha is a long range locator which is mainly used to detect gold and silver. The device includes three individual searching systems:

		Bio-energy system (bionic mode)
		Ionization system (ionic mode)
		Magnetic system (magnetic mode)

The Bionic alpha is an instrument to locate gold, silver and ores up to a small distance. Medium penetration depths are quite possible.

The bio-energy system is able to locate also fresh buried or not buried objects no matter which age they are. The ionization system is mainly used to find buried artefacts.

For long range detection up to large distances the Long Range System bionic 01  is recommended.

The Waterfinder is based on a geo electric measuring method, to locate water deposits. The device is very easy to use and specially designed to detect water.

The device has the following functionality:

		Automatic measurement and analysis
		Simple indication of measured results as percentage

The evaluation of the measured results happens on site and will be indicated in the integrated display. In a short calculating time the device will indicate how much water exists in the measured area in percentage.

Cavefinder A and B is based on a geo-electric method which can be used to find cavities in the target area. Handling of the device is very easy and the device is only designed for detecting cavities such as caves, bunkers and sepulchers.

The device has the following functionality:

		Automatic measurement with simple "Yes/No" evaluation
		Graphical control output to a computer (only with version B)

The evaluation of the measured results take place on site. After a short time of calculation the display of the device shows if there is a cavity or not