Metallsuchgerät Metalldetektor Metallsucher Schatzsucher Detektor metal detector detecteur de metaux, detectores de metales security ,

NEXUS METAL DETECTOR 

THE MOST SPECIAL DETECTOR WITH ADVANCED POWER BETTER OF THE BEST ! Take a look to the pictures and informations about our metal detector science. 

All Nexus metal detectors utilise a fully tuned in resonance search coil ,build on a high temperature
resistant fiber glass plate, combined with an uniquely designed ABS casing, to ensure as long as possible work period with out any change in the performance. The Nexus metal detectors are suitable for beginners and experienced users. However some experience in the metal detecting hobby can be beneficial. In any case it is not necessary that beginners in the metal detecting hobby should dedicate significant amount of time to learn  How to use the Nexus metal detector. The early Nexus metal detectors were difficult to grasp for many people, but over time they have evolved and the new Nexus Standard SE and the new Nexus Coronado have become real master piece of the metal detecting engineering. Now the Nexus metal detectors are easy to use, feature proof and with better build quality than ever before. The Nexus metal detector was first introduced in the fall of 2004. Back then there was only one model offered for sale. In present days we have a range of few Nexus metal detectors for different applications and also number of accessory search coils for them. You can also seek a second opinion to learn more about the Nexus metal detectors and the history of their development

THIS ARE THE TEST WITH COMPARISION OF OTHER METAL DETECTORS

all of the mentioned above is related to comparison between different detector types?  Following the graphic image on this page I would like to begin this explanation with the so called Multi Frequency Technology (MFT) type of detectors. On the very first place it is important to mention that amongst all detectors based on IB principal, the MFT has the lowest efficiency, concerning depth penetration capabilities and discrimination accuracy. The reasons: Setting a search head to work on various frequencies will define low Q at all of the frequency setting. That will result in average to poor depth penetration and unreliable discrimination. Simultaneous frequency transmission from a TX loop is possible, but that kind of transmission will make the work of any IB detector impossible. Also simultaneous frequency transmission will most certainly result in a very low Q for the whole system. MFT can not offer any real practical  advantage to the IB type of metal detectors as far as depth penetration and discrimination accuracy is concernd. Another popular type of IB metal detectors are those with dual frequency settings. All of the mentioned above conditions apply to this type of detectors as well as to the MFT. The difference in this case is that having the search head system to work only on two frequency setting (one at a time) will provide an opportunity to have maximum Q on at least one of the two frequency setting. That will give a good chance for better depth penetration and discrimination accuracy. The most common type of IB detectors are the single frequency metal detectors. Metal detector set to work at only one frequency, have the best chances to achieve good depth penetration and
discrimination accuracy. The next popular type of metal detectors, capable to compete for better depth, are the PI metal detectors. Relative to the transmitted in the ground energy, the PI detectors are with lower efficiency than the IB. However the fact that average PI metal detector can detect targets deeper under ground than average IB detector, is due to the very high level of the transmitted signals (few hundred volts pulses). With that allowance in their basic principal the PI metal detectors can win almost any competition for depth. However the greatest disadvantage for the PI detectors is the lack of reliable discrimination. Regardless of all claims on the PI market, the PI principal can not allow good discrimination to be achieved. The best metal detectors regarding depth penetration and discrimination accuracy are the IB detectors tuned in total or as close as possible to total electro-magnetic resonance. The reasons: It is not possible for any kind of loop to achieve higher Q than the Q as a result of electro-magnetic resonance. In comparison to a standard, not tuned in resonance search head system, one tuned in total resonance can exhibit up to 100 times higher sensitivity to any desired target. That fact alone lead to use of lower electronic amplification, lower electronic instability and much better resistance to thermal changes for the electronic circuit. A RX loop tuned in total resonance will act also as 10 th order band pass filter against any external interference, which will almost eliminate the need of any interference prevention filters. In comparison to off resonance RX loop, one tuned in total resonance is much more sensitive to phase and amplitude changes, which fact can guarantee best depth penetration and discrimination accuracy as can be achieved with any metal detector

for order is easy sent email to  info@bravodog.com  o      admin@wilsonelectronics.info with your details and we answer you daily with total ammount and shipping cost, we offer you the best prices and service and quality of the market. dealers and distributors you are welcome.   

home,           gate opener              metal detectors              goods optics       electronics collar,             archery,          inverter&ups             electronics instrument           electric_bicicle           georadar             radios        auto_treatment              forklift          computer_parts   quality watches  gps   k