• Outdoor use(wall mount or pole mount).
• Protection range 100m , 150m.
• Two synchronized beams of pulsed infrared energy.
• Immunity to infrared interference from sunlight and other ligh sources.
• Easy optical alignment/Highly precise infrared beams.
• Reliably withstands as much as 95% loss of beam energy.

• Alarm distance: 200m or less.
• Infrared beam: Double modulation freq. 500Hz and 20KHz
• Response time: 50-100msec or more.
• Alarm output: 30VAC, DC 0.5A.
• Input voltage: DC 10.5-30V, AC 8-20V.
• Power consumption: 80mA (at DC 12V)
• Ambient temperature: -20⁰C ~ +50⁰C
• Beam Strength Meter: Yes
• Weight: Transmitter/Receiver 2 kg each
• Appearance: Polyestor Power Coating

• Contemporary design fits all modern houses.
• A single chip "watchdog" Microprocessor monitoring circuit, ensures easy operation stable perpormance, reliable quality and long operational life.
• Passcode protected user-friendly operation.
• Protection zones:

  one 24-hours panic zone (N.O.Loop) one 24-hours fire zone (N.O.Loop) one door chime zone (N.O.Loop)

• Each burglary zone can be set monitored or bypassed indepently
• Soft door chime greets visitors when door is opened.
• With two key (#,*) operated panic button.
• Alarm memory for each zone, Battery recharge circuit, and optional remote control.
• Beeps for confirmation, illuminated buttons, different alarm sound output for different situation.
• Selection of entry delay, exit delay, alarm cut-off time, door chime and change of passcode are programmable through keypad.
• With LAN alarm output.
• Built-in transformer 20VA
• Dimensions: 160W x 222L x 60D mm

You can command this remote control unit from anywhere, with a simple touch tone telephone. Each telephone becomes then a remote control. You call the TELEPHONE REMOTE CONTROL (T.R.C), dial your personal code and the command of your choice. This easy way enables you to switch any equipment on/off, from any places. T.R.C only needs to be plugged in the wall (220VAC) and in a telephone outlet. Any 220 Vac load can be plugged in the T.R.C. Three channels are available.

Channel 1 2000 Watts ( 1 on / 4 off ) from the T.R.C output. Channel 2 Insulated relays output ( 2 on / 5 off ) the two extra wires. Channel 3 intern relays ( 3 hook off / 6 hook on ). The switched power can be up to 3000 Watt intermittent ( 5 min on / 5 min off) or 2000 watts continue. The wall outlet where T.R.C is plugged in must be fused as usual ( 16 Amp) and the device plugged in T.R.C must also be fused. You can switch pomp's, lamp's, radio-tv set, video or any sound equipment, computer, machine and so on or just use the second channel.

Channel 2 The output of the second channel is insulated what means that no electric tension comes out of it. This is just like a simple switch. The current going through it must be less or equal than 0,5 amps and the open tension less than 50 volt. You are not able to switch a 220 v load with channel 2 ( only with channel 1 ) this output is meant to command low tension equipment like alarm system, thermostat and batteries powered equipment.

Channel 3 The third channel is usually not used because T.R.C needs it to switch the telephone line. ( put the line "hook off" when called and "hook on" again ). This channel is controlled by the touch 3 and 6 and in some specific cases you need to put the T.R.C off (6) when for example you switch on a computer with modem on the same telephone line.

How it works: you call TELEPHONE REMOTE CONTROL (T.R.C.), wait until the line is put "hook off" ( some thing or some one takes the phone), dial your 4 digits personal code and then the commands of your choice. For example, after your code you can push 1 to switch on a 220v projector or/and 4 to switch off an alarm system or else. It is not important who or what takes the phone, T.R.C, an answering machine or someone, as soon the phone line is put hook off, you can dial your code and commands. T.R.C can work in a transparent way and always decode the DTMF tones. The so called Dual Tone Modulation Frequency. After any command, you get an acknowledgement tone to let you check the validity of your action. An acknowledge tone for ON is different from that for OFF, to prevent any confusion.

The remote control function of the module is very useful for the remote monitoring of installations or machines being placed at isolated places, such as pomp heaters or generators, for instance. The alarm function can be used for fixed/mobile workshops, building sites, garages, machines, car/truck boats, second homes, etc.

A very sensitive microphone enables to hear remotely what happens around the module. This function is very useful to check if, indeed, an order sent to the module is really carried out. For example, after having started a machine remotely, one will be able to hear it functionning. The remote control receiver is equipped with five outputs.

Three 5A relays and two 220VAC (2000Watts) outputs.
The three relays behave like simple two poles (wires) switches. More simply, they make the current get through one pole (wires) to the other, or not . The two outputs AC current also behave like simple switches and, for more reliability, are equipped with semiconductor solidstate relays (no moving parts).

The alarm has 7 inputs and an audio input. In case of trouble, the module calls you with the GSM connected to the module to your fixed or mobile number. Characteristic alert tones are then heard and after having composed the secret code of the module, all the functions of the module are immediately available: the five outputs and the microphone. The alarm tones give you directly which input have triggered the alarm, but the microphone will certainly make it possible to know the cause of the alarm call since you can listen to all the module surrounding sounds. The module is able to  inform you remotely of the input states with two characteristic tones. This tells if the circuits of the questioned inputs 1 to 6, are opened or closed.

Various sensors can be connected to the 6 inputs: switches (push), thermostats, movement detectors (IR), contacts with magnet, gauges of tank, contacts of pressure etc.
The GSM battery is automatically reloaded (charged) by the module which can be powered from 10 to 20 Volt. So there is no need to have acces to the system.

Various options can be programmed to it from any telephone; secret acces code, timing of alarm, how long the module will call as alarm and eventually a local siren timing with one of the relays, etc.
The delivery includes a module, a special gsm, an externe microphone, an installation and use notice